Boat‎ > ‎

Specification

 

LOA 32.65' (9.96 m.)
DWL 30.31' (9.24 m.)
Beam 9.15' (2.78 m.)
BWL 6.8' (2.07 m.)
Draft 7.62' (2.32 m.)
Keel up: 3.28' (1.00 m.)
Disp half load  4,900 lbs. (1985 kg.)
Ballast

1,918 lbs. (870 Kg)
D/L 81.09
RM @ 1 Deg 427 ft/lbs  
Mainsaill 402.57 sq. ft. (37.4 m2)
Jib (L.P. 105 %) 251.87 sq. ft. (23.4 m2)
Asymmetric Spinnaker 1,149.58 sq. ft. (106.8 m2)
ISP 45.28' (13.802 m.)
I 39.28' (11.974 m.)
J 12.12' (3.696 m.)
P 40.16' (12.243 m.)
E 14.89'' (4.540 m.)

 

Official Specification (HipTrader)

 

Construction

Hull and Deck: Vacuum bagged fiberglass sandwich core construction. All interior bulkheads and furniture molded and cored fiberglass construction.

Standard Equipment

Deck:

  1. Primary Winches #40 Harken, Aluminum Drum
  2. Secondary Winches #16 Harken, Aluminum Drum
  3. Spinlok Rope Clutches (5)
  4. 8 Inch Marelon Cleats (4)
  5. Harken Adjustable Jib Leads
  6. Harken Mainsheet Traveler w/Controls And Fine Adjuster
  7. Plastimo Manual Bilge Pump Mounted In cockpit
  8. Stainless Steel Bow Pulpit w/LED Navigational Lights
  9. Stainless Steel Stern Pulpit w/LED Navigational Light
  10. Stainless Steel Stanchions And Lifelines
  11. Stainless Steel Handrails On Cabintop (2)
  12. Stainless Steel Tiller w/Carbon Fiber Extension
  13. Removable Rudder Blade In Cassette
  14. Harken Winch Handles (2)
  15. Kelp Cutter

Interior:

  1. Large V-Berth In Bow Section
  2. Oval Opening Hatch Above V-Berth
  3. Salon w/2 Settee Berths, Chart Table/Sink And Galley Pump
  4. 12Vdc Main Electrical Panel w/Breakers And Voltmeter.
  5. Quarter Berths Aft Under Cockpit (2)
  6. LED Interior Lighting
  7. Storage Compartments Under All Berths
  8. Base For Marine Head Or Porta Potty

Engine Compartment:

  1. Adjustable Bracket For Lowering/Raising Outboard Motor
  2. Compartment For 25 Lt. Fuel Tank
  3. Compartment Vented With Electrical Blower
  4. Engine Controls Recess Built Into Cockpit Starboard Side.
  5. Bridge Deck Hinged Hatch Closure

Mast and Rigging:

  1. Mast, Boom And Prodder Carbon Fiber
  2. 2 Sets Tapered Sweptback Spreaders. Aluminum Foil Sections
  3. ¼” 1X19 Stainless Steel Wire Rigging, Continuous.
  4. Adjustable Backstay
  5. Facnor Jib Roller Furler
  6. Windex Wind Indicator At Masthead
  7. Main, Jib And Spinnaker Halyards.
  8. Main, Jib And Spinnaker Sheets
  9. Main Outhaul, Cunningham and Boom Vang
  10. Keel Hoist

Sails:

  1. 37.4 S/M Dacron Mainsail With Battens, Cunningham And Reefpoint
  2. 23.4 S/M Kevlar Jib, L.P. 105%
  3. 106.8 S/M Nylon Spinnaker

Optional Extras

  1. Electric Bilge Pump with float switch*
  2. Raymarine Navigation Package: Wind, Speed And Depth*
  3. Cushion Package, V-Berth, Salon and Quarter Berths**
  4. Fwd Cabin Canvas Door With Zipper Closure.**
  5. Salon Berth Lee Cloths Complete W/Zippered Pockets**
  6. Life Line Covers (60) Made From Round Foam, PVC Pipe And Covered**
  7. Cockpit Spinnaker Sheet Pockets With Snap On Connectors (1)**
  8. Cockpit All Purpose Bags With Snap On Connectors (1)**
  9. Spinnaker Dousing Bag For Forward Hatch (1)**
  10. Mainsail Cover**
  11. Boat Cover**
  12. Retracted Keel Access cover.**
  13. Boomkicker Solid Vang**
  14. T-Shirts
  15. Baseball Caps with FT10 Logo
  16. Reversible Panama-Jack style hats with FT10 Logo
  17. Additional Spinnaker
  18. Additional Main
  19. Additional Jib

More To Come

Comments